Please sign in so that we can notify you about a reply
Make a statement with these sequential LED housings, available in a full black or white housing. They plug directly into your stock socket.
They feature an integrated halo running light (red) and turn signal light (amber) that splices into your marker light harness. You will continue to use your stock reverse light and harness without modification. This light combination will provide a brilliant running light with a captivating start up sequence that will turn heads. Similarly, the turn signal provides a sequential animation that looks great while clearly indicating to other drivers that you’re making moves!
- 1973-1987 Chevrolet C/K 10 20 pickup Fleetside
- 1973-1981 1982-1988 Chevrolet C/K 30 pickup Fleetside
- 1973-1987 GMC C/K/R/V 1500 2500 3500 pickup Wideside,
- 1988-1989 Chevy/GMC R/V 2500 pickup
- 1988-1991 Chevy/GMC R/V 3500 pickup
- 1973-1987 Chevy Suburban C/K 10, 20
- 1987-1988 Chevy Suburban V/R 10 20
- 1973-1991 GMC Suburban V/R 1500, 2500
- 1973-1991 Blazer/Jimmy (full size)
Installation Tips:
- Remove the old taillight lenses and housings.
- Review the Wiring Tips below to determine the wiring method of choice.
- Mount the correct frame to each side of the truck using your stock hardware.
- Place the gasket inside of the frame.
- Secure the bulbs into the new housings and set the housing between the frame and the lens/
- Secure your lens to the frame using your stock hardware.
- Congratulations! You have installed the new taillights!
Wiring Tips:
- You can wire these a number of different ways to achieve the look you want.
- The black wire is the ground. For the perimeter light, the red wire is the running light. The yellow wire is the turn signal.
- The recommended wiring method is to convert the stock 2-wire setup to a 3-wire setup by using an adapter like this: https://www.amazon.com/dp/B08MZ9CC2S?psc=1&ref=ppx_yo2ov_dt_b_product_details . Using an adapter like this one will not trigger the turn signal when signal is sent to both taillights (i.e. when the brake pedal is depressed).
- If you want the running lights to turn on at startup and run continuously, you can connect the red wires to an accessory circuit in your system.
- If you want the lights to turn on and off like the stock setup, just splice the wires into your stock harness.
Warranty Coverage
All lighting products include a 30-day limited warranty covering defects in materials or workmanship. If a product is found to be defective within this period, we will provide a replacement part at no cost.
Post-Warranty Service
After the 30-day warranty period, the manufacturer offers paid repair or replacement services for bulbs and lighting components. Pricing will vary based on the part and scope of repair.
We accept returns within 30 days of purchase, provided the product has not been installed, altered, or modified in any way. Returned items must be in their original condition and packaging. Once inspected and approved, refunds will be issued to the original method of payment.