Please sign in so that we can notify you about a reply
Clear side markers are an easy inexpensive way to upgrade the look of your truck.
If clear isn't your thing, we can do the lenses in smoke or any other custom color.
Our lenses are an exact duplicate of the OEM so they fit great and provide a clean OEM look.
If your looking to save a few bucks, you can get just the lenses without the housings. You'll have to separate your OEM lenses from the housings using a dremel or oscillating tool, then use clear epoxy to bond our clear lenses on your OEM housings. It takes a bit of DIY but it can be done in a few hours. You can also choose to buy our lenses and housings and assemble them yourself. See our assembly guide
Top quality chrome trim can be purchased at LMC Truck or cheaper alumimum trim on ebay.
Fits the following models:
- 1981-1987 Chevrolet Pickup Truck C/K 10 20 30
- 1973-1991 Chevrolet K5 Blazer
- 1981-1991 Chevrolet Suburban
- 1981-1991 GMC S15 Jimmy
- 1981-87 GMC C/K 1500 2500 3500 Truck
- 1988-89 Chevy GMC R/V 2500 Truck
- 1988-91 Chevy GMC R/V 3500 Truck
1. Test fit lenses and housings, make any adjustments if necessary.
2. Cover the lenses with painters tape to protect them. If your clamps don't have a smooth surface, put 2-3 layers of tape
3. Sand both matting surfaces
4. Apply a 2 part clear epoxy, ideally UV resistant for clear lenses. Apply the epoxy to the housing for the 2 long sides. Then apply the epoxy on the lenses for the 2 short ends.
5. Press lens to housing, make sure the holes are centered and clamp.
