Please sign in so that we can notify you about a reply
Clear fender markers are an easy inexpensive way to upgrade the look of your dually.
You can order them pre-assembled for a plug and play installation or save a few bucks and assemble them yourself
If you are a DIYer, you can save a few bucks and assemble the lenses on housings yourself, the assembly is very similar to our squarebody side markers, see below
Quantity of 1 = 2 lenses
Assembling the dually markers is very similar to the squarebody fender markers.
1. Test fit lenses and housings, make any adjustments if necessary.
2. Cover the lenses with painters tape to protect them. If your clamps don't have a smooth surface, put 2-3 layers of tape
3. Sand both matting surfaces
4. Apply a 2 part clear epoxy, ideally UV resistant for clear lenses. Light smoked and smoked lenses look better with tinted epoxy but clear will work as well. Apply the epoxy to the whole perimeter as well as the round bolt holes.
5. Press lens to housing, align and clamp.
6. Wipe any excess epoxy while it's still wet
6. Clamp
