Please sign in so that we can notify you about a reply
Clear turn signals are an easy inexpensive way to upgrade the look of your truck.
If clear isn't your thing, we can do the lenses in smoke or any other custom color.
Our lenses are an exact duplicate of the OEM so they fit great and provide a clean OEM look.
We are providing the lenses only, they would have to be installed on your housings.
1. Cover the lenses with painters tape to protect them. If your clamps don't have a smooth surface, put 2-3 layers of tape
You'll have to use housings from another set of turn signals
2. use a oscillating tool or dremel to cut the amber lenses off. Making sure to not damage or cut the housings. You'll be destroying the amber lenses in this process.
3. Remove the amber lenses
4. Remove all traces of the remaining amber lenses, any small amber color will show through the clear lenses.
5. Test fit lenses and housings, make any adjustments if necessary.
6. Sand the matting surface on the lenses
7. Apply a 2 part clear epoxy, ideally UV resistant for clear lenses. Apply the epoxy to the whole perimeter of the lens.
8. Wipe any excess epoxy while it's still wet
9. Press lens to housing, align and clamp.
10. In this case we used tape to hold the lens in place instead of clamps while curing.
