Our load resistors are the perfect solution for Hyper Flash (bulb out signal / OBC error message) caused by LED bulbs.
Most newer cars require these resistors when using LED bulbs for turn signals, especially switchback LEDs.
Installation is easy, simply install it between the bulb and the power. Quick connects are included but splicing into the wiring is preferable.
- Works with 1156, 1157, 7443 and 3157 bulbs.
- Easy pre-wired, Plug & play installation. No tools and modification needed.
- Power: 50W
- Resistance: 6 ohm
- Work on all 12V DC vehicles
- Dimensions: Approx. 5 x 2.2 x 1.7 cm (1.97 x 0.9 x 0.6 inch)
NOTE : These load resister may get really hot. Please mount them on metal surface and not in contact with any plastic parts.
Quantity of 1 = 2 load resistors + 4 quick connect
Load resistors 50W 6 ohm
- Availability: In stock