FAQ
We are a canadian business but since 90% of our business is to the USA, all our prices are in USD funds
We have 4 standard colors. Clear, smoke 5%, light smoked and smoked. Our smoked color is a medium/dark tint, the light smoked is pretty light while the smoke 5% is almost clear. The tint can vary a bit depending on the lens thickness but for the most part we try to use the right term in the drop down box to represent the right shade.
Light smoked

We can do almost any custom color that you need. We can do saturated and light pastel colors as well. Here are a few examples of different colors we have done in the past.
Paint color match, we can get pretty close by just looking at pictures, but there can be a slight color variation.
We can add pearl, its hard to photograph properly, but it ads an extra sparkle just like metallic/pearl automotive paint
UV Glow is a new effect that will glow bright blue under a ultra violet light source (blacklight). This can be an outside light source or some UV led bulbs, we stock the T10 UV bulbs. Under normal light, the lenses appear clear with a purplish hue.
The process to open up most headlights is the same, here is how we do it at the shop.
PREHEAT (very important to preheat) your oven to around 150 degrees F. While it is preheating, remove the screws on the backside of the headlight which also hold the lens to the housing. Once oven is preheated, place one headlight in the oven for ten to fifteen minutes. Remove headlight, then you can use a couple flathead screwdrivers to carefully pry the clear lens off.
BE SURE not to touch the inside of the lens or the chrome housings as they will be perfectly clean. This will prevent you from have to clean or polish them later. Remove the inside bezel and swap out the amber lenses for the clear, in most cases they will need epoxied in.
Reassemble the headlight, place in oven for another 10-15 minutes, then reinstall the screws. This should seal up your headlight for you, but I like to supplement with a nice bead of clear silicone all around the outside as well as a backup.
These are just generic instructions but it should be helpful for most headlights. If your not comfortable opening your headlights yourself, we can recommend a few retrofit shops to do the work for you.
We are always looking for new projects, if your looking for something that we don't currently produce, send us an email with some details. We specialize in smaller lenses such as turn signals, side markers and headlight markers.
While we can produce larger lenses such as tail lights, we usually try to stay under 12 inches.
If you want us to consider making lenses for your car, keep in mind that it needs to be something that others will be interested in as well. If your not sure, usually a post on a forum or facebook group will let you know pretty quickly if others are looking for the same thing.
We almost always work with group buys of 10 or more unless its something we're already interested in.
We ship worldwide, if your interested in a shipping quote, add a product to the shopping cart. Then click on the shopping cart (top right) and then on View cart. From there you will be able to get a shipping quote.
We prefer payments with paypal, you can also send a payment through paypal using your credit card or debit card without having to create an account.
All charges are in USD funds.
As a general rule, a set is almost always 2 lenses, left and right. If a car has identical side markers for the front and back, you will need to select 2 sets to replace all lenses. For cab lights, if the truck has 5 lenses, our set will include 5 lenses. Third brake lights come as a single lens.
What is an SMD?
LED = Light Emitting Diode
SMD = Surface Mount Diode
LED (Light Emitting Diode) lights are small, solid light bulbs which are extremely energy efficient. SMDs (Surface Mount Diodes) are the next generation LED light.
Since SMDs are 3 times brighter then regular LEDs, a 5 SMD bulb is brighter then a 1 SMD bulb
Note: LED lamps have a positive and negative terminals, so if there is no lighting after inserting it into socket, simply remove it and insert it in the other direction.
We offer white, red, amber, blue and green LEDs
Error free LEDs
The canbus error free bulbs are designed to eliminate hyper flash, flicker problems and on dash warning errors that are common on most cars when replacing side marker bulbs with LED bulbs.
We use a medium smoke for our smoked lenses which lets the bulb shine through with no issues.
Our load resistors are the perfect solution for Hyper Flash (bulb out signal / OBC error message) caused by LED bulbs.
Most newer cars require these resistors when using LED bulbs for turn signals, especially switchback LEDs.
Installation is easy, simply install it between the bulb and the power. Quick connects are included but splicing into the wiring is preferable.
- Works with 1156, 1157 and 3157 bulbs.
- Easy pre-wired, Plug & play installation. No tools and modification needed.
- Power: 50W
- Resistance: 6 ohm
- Work on all 12V DC vehicles
- Dimensions: Approx. 5 x 2.2 x 1.7 cm (1.97 x 0.9 x 0.6 inch)
NOTE : These load resister may get really hot. Please mount them on metal surface and not in contact with any plastic parts.
If your looking for a similar option for T10 bulbs, select the 'error free' bulbs when checking out.