Easy to Install: With the Mini H1's threaded mounting shaft that fits through the pre-existing hole in the back of your headlight reflector; They make retrofitting projectors easier than ever with little to no mods.

Morimoto H1 6.0 Projectors: Feature clear lenses to give them a wide, intense beam pattern with a sharp and colorful cutoff line. The new 6.0 version is enhanced with an all new optically advanced reflector bowl; improving low and high beam performance beyond all competing models. As the world's biggest Morimoto distributor, all projectors tuned to perfection here in our shop.

Morimoto XB35 Ballasts: Feature relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up giving them a failure rate of less than .02%>

Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

Morimoto Relay Harnesses: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls.

Accessorize: The optional butyl glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos.

Easy to Install: With the Mini H1's threaded mounting shaft that fits through the pre-existing hole in the back of your headlight reflector; They make retrofitting projectors easier than ever with little to no mods.

WHAT'S INCLUDED

2x Projectors:
Morimoto Mini H1 6.0
2x Ballasts:
Morimoto XB35 AMP
2x Igniter:
Morimoto XB Igniter (AMP)
2x Bulbs:
Morimoto XB H1 5500K
2x Shrouds:
User Preference
Warranty:
Five Years (Excludes moisture damage on ballasts)

COMPATIBILITY

Projectors:
Low and High Beam Capable
Wire Harness:
Match your original bulb size
Vehicles:
Universal Fit (may require modification)

Bi-Xenon Morimoto Mini H1 Elite HID System

  • Availability: In stock
  • $245.00


Available Options